Use the Search by Car or Truck tool to find additional AEM products. To find an AEM dealer near you, use Search for AEM Dealer or simply visit AEMintakes.com. |
Use the Search by Car or Truck tool to find additional AEM products. To find an AEM dealer near you, use Search for AEM Dealer or simply visit AEMintakes.com. |
Ford has released the thirteenth generation F-150 for the 2015 model year. With all-aluminum body panels, as well as a new frame made of 77% high-strength steel, the 2015 F-150 has shed up to 750 lbs. Less weight means higher payload and towing capacities, more miles per gallon, and a better power to weight ratio. Performance minded drivers know that less weight and more power combine to increase the rate of acceleration. The 2015 Ford F150 5.0L, rated at 385 horsepower and 387 lb-ft of torque, is a capable of towing almost 11,000 pounds depending on the truck’s configuration. However, in about 90 minutes or less an AEM air intake system can be installed to help the 2015 Ford F-150 5.0L V8 engine with a boost in horsepower and torque for improved towing performance and better acceleration.
As is the case with the 2015 Ford F150 5.0L, the factory air intake tubing, stock air filter box, and disposable air filter is a significant point of restriction in modern fuel injected cars or trucks. AEM has developed an air intake system that eliminates the restrictive stock intake tube, sound baffling, and air filter box. By replacing restrictive factory components with a charcoal gray powder coated mandrel bent aluminum air intake tube coupled to an open element AEM Dryflow synthetic air filter an AEM intake is able to increase horsepower, torque and acceleration of 2015 Ford F150 5.0L V8 models. Additionally, the AEM air intake for 2015 Ford F150 5.0L V8 trucks, number 21-8129DC, includes an application specific air filter heat shield designed to retain the benefits of the factory cold air inlet near the truck’s front grill.
An AEM Dryflow air filter’s high-flow synthetic filter media and pleated design, along with the mandrel-bent aluminum intake tube’s smooth inner surface, helps to reduce turbulent airflow to promote more efficient combustion and increased power. The increase in airflow and reduced restriction resulting from the installation of an AEM 2015 Ford F150 5.0L air intake system 21-8129DC improves horsepower and torque output of the 2015 Ford F150 5.0L across the entire RPM range. Peak estimated horsepower and torque gains came on at 4,500 RPM when installed on an otherwise stock 2015 Ford F150 5.0-liter V8. At 4,500 RPM the AEM air intake 21-8129DC was shown to provide an estimated additional 16 horsepower and 18 lb-ft of torque at the rear wheels.
Owners of 2015 Ford F150 5.0L models shouldn’t worry that increasing performance with an AEM air intake system will put their truck at risk. AEM air intake systems and AEM Dryflow air filters are designed to provide high-airflow and increased performance without sacrificing filtration efficiency or engine protection. AEM Dryflow air filters are built with a non-woven synthetic air filter media pleated between coated wire mesh. Non-oiled AEM Dryflow air filters are designed for easy cleaning and durable service without the need for air filter oil. AEM Induction Systems stands behind its products with a Lifetime Limited Warranty. Plus the ability to wash and reuse an AEM Dryflow air filter means it will be the last air filter that 2015 Ford F150 5.0L owners will need to purchase. The AEM air intake system for the 2015 Ford F150 5.0L V8 comes complete with all the necessary hardware and step by step installation instructions. AEM air intake 21-8129DC is designed to provide increased performance and an aggressive engine sound for the following Ford F150 models: 2015 Ford F-150 5.0L V8 Use the Search by Car or Truck tool to find additional AEM Ford F150 performance products, or to find performance upgrades for other vehicles. To find an AEM dealer near you, use Search for AEM Dealer or simply visit AEMintakes.com. |
|||||
|
|||||
In an effort to improve horsepower and meet the needs of AEM cold air intake fans nationwide, AEM offers two performance air intake systems for 2011, 2012, 2013, and 2014 Ford Mustang 3.7L V6 models. AEM 2011-2014 Ford Mustang V6 air intake, number 22-686C, differs from the alternate AEM cold air intake system available for 2011-2014 3.7L models because AEM designers retained the use of the stock air filter box. Designing AEM cold air intake 22-686C around the stock air filter box allowed AEM Intake designers to retain all factory connections, including stock emissions control equipment, to create a 50-state street legal air intake system. Installation of the AEM 2011-2014 Ford Mustang V6 3.7L 50-state street legal air intake is incredibly easy compared to the alternate AEM cold air intake and only requires minimal tools with reduced installation times.
The maze of accordion like intake tubing, and noise baffling installed at the factory adds a significant source of restriction to stock 2011-2014 Ford Mustang 3.7L V6 models. Included in the AEM 50-state legal air intake system for 2011, 2012, 2013, and 2014 Ford Mustang V6 3.7L models is a free-flowing mandrel-bent aluminum intake tube. This new aluminum AEM air intake tube is designed to overcome the restriction found in the stock air ducting. Restriction isn’t the only trouble with the stock air intake as it also creates turbulence in the incoming air. The mandrel-bent aluminum intake tube used in 22-686C has a smooth and consistent internal surface for reduced airflow turbulence. Reducing restriction and straightening airflow allows the Fifth Gen Ford Mustang V6 engine to work more efficiently. To complement the under hood appearance of the 2011-2014 Ford Mustang 3.7L V6 the intake tube is protected with a durable charcoal gray powder coat finish that will look great for years to come. An added benefit of the AEM mandrel-bent aluminum intake tube is that it will eliminate the stock intake noise baffling system. This will give 2011-2014 Ford Mustang V6 models a more aggressive engine sound.
In-house dyno testing shows that the AEM 2011, 2012, 2013, and 2014 Ford Mustang 3.7L V6 50-state street legal air intake system produced a surprising estimated 6 horsepower and 7 lb-ft of torque maximum increase at the rear wheels of an otherwise stock 2012 Ford Mustang 3.7L with manual transmission. By simply reducing restriction, and improving airflow the AEM performance 2011-2014 Ford Mustang V6 50-state street legal air intake system is able to improve horsepower and torque delivery across the RPM range. Making usable horsepower increases in common RPM ranges is a design goal at AEM as this yields a performance upgrade that can be used even during normal driving situations.
AEM Dryflow air filters are performance designed to reduce restriction over typical paper air filters. The AEM 2011-2014 Ford Mustang V6 3.7L 50-state street legal air intake system includes AEM Dryflow replacement air filter, number 28-20431. Using an AEM Dryflow replacement air filter helps to reduce the restriction inherent to stock disposable paper air filters. AEM Dryflow air filters are built with a robust synthetic air filter media designed to help increase airflow, and provide outstanding engine protection without the need for air filter oil. AEM Dryflow replacement air filters are washable and reusable and can go up to 50,000 miles between cleanings under normal highway driving conditions. When it’s time to clean the air filter, it can be easily completed using the AEM air filter cleaner 1-1000. Cleaning is performed by following a simple four step process. Because an AEM dry filter does not require oil, the air filter can be returned to service sooner and with less effort. The AEM cold air intake system 22-686C is an incredibly fast and easy upgrade for 2011, 2012, 2013, and 2014 Ford Mustang 3.7-liter V6 models. By retaining the stock air filter box, installation of AEM cold air intake 22-686C can be completed with minimal tools and less time than the alternate AEM air intake system for 2011-2014 Ford Mustang 3.7L V6 models. Simple to follow step by step instructions are included and there is no need to make any other modifications to your Ford Mustang V6 for increased performance. AEM cold air intake 22-686C is street legal in all 50 states for 2011-2014 Ford Mustang 3.7L V6 models making this Mustang performance upgrade available everywhere. AEM is so confident in its products that AEM backs its Dryflow Air Filters and Cold Air Intake Systems with a lifetime limited warranty. AEM air intake, number 22-686C, is designed to add a 50-state street legal performance upgrade to the following Ford Mustang models:
2014 Ford Mustang 3.7L V6 Additional AEM Mustang performance products as well as performance upgrades for other vehicles can be found using the AEM Product Search. To find an AEM dealer near you, use Search for AEM Dealer or simply visit AEMintakes.com. |
|||||
|
|||||
The AEM Dryflow synthetic air filter 21-2127DK was first developed for the 2013, 2014, and 2015 Nissan Juke and Nissan Juke NISMO AEM cold air intake. This Dryflow clamp-on universal air filter can be purchased as an extra filter for an AEM CAI, or for a custom air intake application. This air filter was designed to maximize air filter surface area and still fit within a limited amount of space. The oval shape of AEM Dryflow clamp-on air filter, number 21-2127DK, combined with the pleated synthetic filter media will provide high airflow, excellent filtration, long service intervals, and exceptional engine protection
AEM Dryflow clamp-on air filter 21-2127DK has an oval shape measuring 6-1/16” long by 4-1/2” wide. This air filter is 5-1/8” tall and incorporates a 2-3/4” inside diameter mounting flange. If purchased as a spare air filter for an AEM cold air intake, such as 21-734C for the 2013-2015 Nissan Juke 1.6L, this clamp-on Dryflow air filter is covered by a lifetime limited warranty. If 21-2127DK is used for any custom, racing, or off road use it is warranted against defective materials or workmanship for one year only. Advanced AEM Dryflow, non-woven, synthetic air filter media allows for easy cleaning, durable service, and excellent filtration without the need for air filter oil. When it does come time to service an AEM Dryflow cold air intake filter, cleaning can be easily completed using the AEM air filter cleaner 1-1000. Cleaning is performed by following a simple four step process and the AEM dry filter does not require oil. No oil means the filter can be returned to service sooner and with less effort. Use the Search by Car or Truck tool to find vehicle specific AEM products, or view additional AEM clamp-on Dryflow air filters on the Universal Air Filters By Dimension page. To find an AEM dealer near you, use the Search for AEM Dealer feature or simply visit AEMintakes.com. |
|||
 |
|||
