AEM Short Ram Intake Increases Power of 2013, 2014, 2015 and 2016 Audi A4 A5 2.0L Turbo B8
- Jul 13, 2015
The European tuner car segment within the Sport Compact community has had a huge impact on the automotive scene. Helping to spark the Euro-tuner scene in the mid-nineties was the Audi A4 compact executive car. Since the German car manufacturer introduced the A4 model in 1994, the A4 has become a staple choice for European car enthusiasts. The A4 chassis is offered in a variety of configurations. It has been available in front-wheel drive or in Audi's ''Quattro'' permanent four-wheel drive system and for car buyers who don’t want a performance sedan, Audi offers the A5 as the two-door coupe version of the popular A4.
The 2013, 2014, 2015, and 2016 Audi A4 or A5 2.0L Turbo B8 comes standard with a 2.0-liter turbocharged engine rated at 220 horsepower. The Audi TFSI 2.0 turbo is considered an under square engine with its stroke being proportionately longer than its bore. As a result the Audi 2.0L TFSI turbo produces exceptional torque which comes on strong and continues until redline. Part of the fun of small displacement turbocharged cars is finding ways to safely and reliably increase performance. Euro-tuner enthusiasts seeking an easy bolt-on horsepower upgrade for 2013, 2014, 2015, and 2016 Audi A4 Or A5 2.0L Turbo B8 models with the Audi 2.0 TFSI engine, should look to AEM® short ram Air Intake System 21-750 for the increased power and sporty engine sound they crave.
An AEM cold air or short ram intake system is designed to improve an engine’s efficiency by reducing the amount of power being spent on drawing air into the engine. Typically, the factory air intake tubing, stock air filter box, and disposable air filter is a significant point of restriction in modern cars and trucks. The stock components are particularly restrictive in cars with turbocharged engines. By replacing restrictive factory components with an AEM CAI or short ram intake system, the engine is able to breathe easier, in turn increasing performance by boosting horsepower and torque which results in quicker acceleration.
The AEM 2013, 2014, 2015, and 2016 Audi A4 or A5 2.0L Turbo B8 air intake replaces factory parts with a washable/reusable AEM Dryflow® air filter, an application specific semi-closed air filter heat shield, and an EPDM rubber molded air intake coupler to retain factory connections. The result is quicker acceleration, a sportier engine sound, and improved drivability while maintaining a factory-like fit and finish. The AEM air intake system for 2013-2016 Audi A4 & A5 2.0-liter turbo models comes complete with all the necessary hardware and step by step installation instructions to complete a proven bolt-on power upgrade in about 90 minutes. AEM Induction Systems thoroughly tests all its air intake systems to ensure that they safely increase performance where drivers can use it most. When installed on a 2014 Audi A4 2.0L turbo with an automatic transmission, AEM short ram intake 21-750 made impressive horsepower and torque gains at a low and very commonly used 3,200 RPM. The AEM 2013, 2014, 2015, and 2016 Audi A4 or A5 2.0L Turbo B8 air intake was shown to provide an estimated increase of 11 horsepower and 18 lb-ft of torque at the wheels during in-house dyno testing. Additionally, in-house durability testing combined with over the road testing, gives AEM Induction Systems the confidence to back this air intake system and Dryflow air filter with a lifetime limited warranty. AEM short ram intake 21-750 is designed to improve performance of the following Audi 2.0 TFSI powered models: 2016 Audi A5 2.0L L4 Use the Search by Car or Truck tool to find additional AEM products for the Audi models. To find an AEM dealer near you, use Search for AEM Dealer or simply visit AEMintakes.com. |
|||||
|
|||||
