AEM Cold Air Intake Adds Horsepower and Torque to 2014 - 2016 Infiniti Q50 Sedans
- Feb 27, 2017
If that’s not enough power for you, and really, when is it ever, AEM has the solution you seek. The AEM 21-774DS performance air intake system is a free-flowing, induction system designed to replace the restrictive factory air filter and air intake tubing on 2014 – 2016 3.7L V6 Infiniti Q50 models. The intake system consists of two roto-molded plastic intake tubes, two precision dimensioned steel heat shields, and two conical AEM Dryflow air filters. One key to the performance of the AEM 21-774DS air intake system is the Dryflow air filters made of non-woven synthetic filter media, a modern solution for controlling the quality of air that passes through it. Each 5.5-inch AEM 21-202DOSK conical filter helps protect your engine from harmful road grit, and both are mounted right at the front of the car where each can take full advantage of the cool incoming air, protected by a heat shield to keep underhood air out of the engine intake air.
If the shortest, most efficient path between two points is a straight line, it makes you wonder what automotive engineers had in mind when they design intake air ducting. A duct with twists and turns creates turbulent air and turbulent air doesn’t flow or mix with fuel as well. A duct with minimal bends, on the other hand, allows for the smooth flow of air and thus a greater volume of air reaches the engine and helps to mix with the atomized fuel. That’s the concept behind the AEM 21-774DS for your 2014 – 2016 3.7L V6 Infiniti Q50. Noting the opportunity, AEM engineers developed the 21-774DS cold air intake, which they tuned and dyno-tested to improve acceleration and add a nice raspy engine sound. Installation is a relatively easy process, adding an estimated 10 horsepower and nearly 13 ft-lb of torque to your Q50. The performance increases can be easily achieved with a DIY installation that takes around 90 minutes or less with tools found in most garages. The AEM 21-774DS air intake systems come with the necessary boots, clamps, and hardware for an OEM-type appearance. The kit also accommodates all factory emissions and vacuum lines. Existing mounting points are used for simple installation.
The 21-774DS is backed by AEM's Lifetime Limited Warranty. The AEM 21-774DS is designed to fit the following vehicles: 2016 INFINITI Q50 3.7L V6 Fuel Injection - All Models | ||||
 | ||||
| ||||
| | ||||
